BS-2600 / BS-2600S Seal-A-Gap
A one-component, paintable and flexible acrylic sealant formulated for sealing gaps and joints
where slight movements or vibration, if occurred, could cause conventional, non-elastic fillers and
putties to crack and fall off. It is economical, environmentally friendly, and its adhesion to most
porous substrates is good even without primer. It can be cleaned up with water.
Product Description
Application Direction:
1. Surfaces must be clean, dry and free of dirt, grease, oil or water.
2. Surfaces should be cleaned with alcohol, M.E.K. or other suitable solvent. Do not use soap or
detergent.
3. For a neat finish, apply masking tape and remove it before sealant skins over.
4. Cut nozzle at 45° angle to desired bead-width and apply to substrate with cartridge gun.
5. Tool the sealant within 15 minutes of extrusion before it skins.
6. Allow to dry for one hour before applying water-based paint and 24 hours for oil-based paint.
7. Uncured sealant can be cleaned up with damp cloth.
Reviews
There are no reviews yet.