BS-2610 Gap Sealant
An economical, environmentally friendly acrylic sealant for general purpose caulking and sealing
applications. It is paintable and has good adhesion to most porous surfaces. It is formulated with
good body thus able to withstand pressure during the installation. It is suitable for sealing gaps and
joints where slight movements or vibration, if occurred, could causes conventional, non-elastic
fillers and putties to crack and fall off. It can be applied smoothly and easily and can be cleaned up
with water.
Product Description
Application Direction:
1. Surfaces must be clean, dry and free of dirt, grease, oil or water.
2. Surfaces should be cleaned with alcohol, M.E.K. or other suitable solvent. Do not use soap or
detergent.
3. For a neat finish, apply masking tape and remove it before sealant skins over.
4. Cut nozzle at 45° angle to desired bead-width and apply to substrate with cartridge gun.
5. Tool the sealant within 5 minutes of extrusion before it skins.
6. Allow to dry for one hour before applying water-based paint and 24 hours for oil-based paint.
7. Uncured sealant can be cleaned up with damp cloth.
Reviews
There are no reviews yet.